2,000 GPD Static AUTO FILL & FLUSH R/O Filter System – Floor Standing

2,000 GPD Static AUTO FILL & FLUSH R/O Filter System – Floor Standing

£2,095.02 Ex VAT

KEY FEATURES
  • Fully automated Flush & Fill
  • Water & Booster Pump Cutoff (when holding tank full)
  • Auto Replenishment of Water (detects when holding tank needs more water)
  • 20” 5 Micron Sediment Filter Removes Dirt, Sand and Rust.
  • 20” Carbon Block Filter Removes Trihalomethanes, Pesticides, Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium Cysts.
  • 40” R/O Membrane with ultra efficient (99%) rejection rates make it an ideal energy saving, economical, high efficient filter
  • 11 ltr DI vessel complete with Resin designed to remove the last 5 % of Total Dissolved Solids from the water giving 100% Pure water
  • Water & Booster pump cutoff (when holding tank full)
WHATS INCLUDED
  • Aluminium Wall Hanging Support Frame
  • 2 x 20” Pre-Filters
  • 1 x Low Pressure 40” Spectrum R/O Membrane
  • 1 x 11ltr D/I Resin vessel with quick release ports
  • Xline Auto-Flush & Fill Electronic Controller
  • Xline 240v Booster Pump Controller
  • Electronic Float valve (for use in your holding tank)
Categories: ,

Description

This systems comes with our automated flush and fill functionality, this fully automates the flushing of your membrane (at the start of the cycle and also every hour for 5 minutes), complete shutoff of water when your tank is full.

This system also offers the functionality to control a 240v booster pump, essentially the systems turns the booster pump on while filling, then when the tank is full it kills the power to the pump making sure it will never burn itself out.

One of the great features of this system is the fact that you do not need to manually start the filling process everyday, as this system will detect when you start to take water out of your holding tank, and will instantly start to produce pure water until the tank is full again. With this feature you can pretty much guarantee you have a full tank of pure water ready to go all the time.

As with all reverse osmosis filter system, the higher the tap pressure from your water source the better the system will run, as this helps to produce water quicker and to also keep your running costs lower over time.

**Ideally this system needs to have a tap feed of around 60-90psi. Most UK households have poor tap pressure (less than 50psi) causing fill times to be slower and to increase running costs. We always recommend if you have a feed of less than 50psi then a booster pump will be needed to boost up the pressure. We can supply all of our filtration systems with a booster pump if needed.**

You may also like…

Related products